KONFIGURASI VLAN CISCO

Konfigurasi 2 Vlan dengan 1 Router Di CISCO

Skenario

3 PC Office terhubung dengan 1 Switch  

3 PC hrd terhubung dengan 1 Switch

Di hubungkan dengan 1 Router agar bias berkomunikasi dengan kedua bagian tersebut

Konfigurasi Switch 1

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan ?

<1-1005> ISL VLAN IDs 1-1005

Switch(config)#vlan

% Incomplete command.

Switch(config)#vlan 10

Switch(config-vlan)#name office

Switch(config-vlan)#ex

Switch(config)#vlan 9

Switch(config-vlan)#name hrd

Switch(config-vlan)#ex

Switch(config)#exit

Switch#

Konfigurasi Switch 2

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#vlan ?

<1-1005> ISL VLAN IDs 1-1005

Switch(config)#vlan

% Incomplete command.

Switch(config)#vlan 10

Switch(config-vlan)#name office

Switch(config-vlan)#ex

Switch(config)#vlan 9

Switch(config-vlan)#name hrd

Switch(config-vlan)#ex

Switch(config)#exit

Switch#

Konfigurasi Router

Router#en

Router#config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int gig0/0

Router(config-if)#ip add 192.168.10.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

Router(config-if)#ex

Router(config)#int gig0/1

Router(config-if)#ip add 193.168.0.1 255.255.255.0

Router(config-if)#no shut

Router(config-if)#

Hasil ping dari PC office ke PC Hrd

Hasil ping dari PC Hrd ke PC Office